Based in Unit 102 Coolmine Ind Est
Attic & Roof Insulation Dublin
Moy Isover Sarking Batt
Moy Isover Sarking Batts are high quality lightweight insulating Batts, manufactured from mineral wool. This sarking batt has been developed specifically for use in ceilings following the pitch of the roof and enclosing a habitable space, thus servicing the market of attic conversions and new dormer bungalow construction.
They are also particularly useful for timber-framed buildings, acoustic insulation in partitioning and over suspended ceilings.
Building Specification
The complete area of the top floor ceiling is to be insulated with Moy Isover Roll of a thickness of 200mm. Insulation of a width appropriate to the joist spacing to be laid between the joists and to finish over wall plate on external walls. All end joists to be close butted. Maintain a minimum 50mm Airspace between insulation and sarking-felt at eaves. Cold water tank and pipes to be separately insulated. Do not insulate under the cold water tank.
U. Value
Domestic Pitches Roofs with a typical construction as follows: 30ºC Pitches Roof, with slates or concrete tiles on timber battens, sarking felt or breather membrane underlay. Moy Plus laid between joists with Gyproc Plasterboard on under side.
* 300mm of Moy Plus is used in roof spaces of special high thermal efficient houses. Leading timber frame home manufacturers use this product.
Properties
Moy Isover is the only glasswool manufactured in Ireland. It consists of a flexible, unfaced, resilient, low density glass mineral wool quilt designed for thermal, acoustic insulation and fire protection of roofs, walls, and floors of buildings, lightweight structures and partitions.
Fire Performance
Moy Isover is Non Combustible to BS476: Part 4.
Acoustic Performance
Moy Isover is widely used for noise control purposes in a variety of applications including lightweight partitions and for sound absorption over suspended ceilings. Acoustic performance depends specifically on the thickness of the material, method of construction and other site factors.
Permanence
Moy Plus is rot-proof, odourless, non-hygroscopic, does not sustain vermin and will not encourage the growth of fungi mould or bacteria.
Permanence
Moy Plus rolls are compression wrapped in Polythene.
Technical Service
A Technical Service is available at Head Office; specialist staff will be pleased to discuss all aspects of insulation with architects, specifiers, builders and other users.
Advantages of using Moy Plus
- High Thermal Insulation Value
- Non Combustible
- Efficient Sound Reduction
- Vermin and Rot Proof Chemically Inert
- Economical
- Easy to handle and install
- Maintenance-Free
- Environmentally friendly
- Product Details
Moy Plus can be produced with facing or backing materials such as paper, polythene, tissue or foil.
Note: Also available in split sizes:
100mm – 2 x 600 and 3 x 400
150mm – 2 x 580 and 3 x 386
200mm – 2 x 580 and 3 x 386