Based in Unit 102 Coolmine Ind Est

Fire Protection Insulation Dublin 

PFC Corofil Coated Panel

PFC Corofil Coated Panel system comprises pre-coated panels and coating which together form a fire barrier fitted around service penetrations. The panels are cut on-site to suit the exact openings and the fire rated coating is used to seal any small gaps and provide a fire and smoke-tight seal.

  • Four (4) hours fire resistance
  • Unaffected by humidity
  • Quickly and simply installed
  • Cold smoke seal
  • Suitable for use around most types of service penetrations

For more info regarding our energy saving solutions and insulation services, get in contact with Usher Insulations today!


The Coated Panel system consists of pre-coated panels and fire rated coating. The 1200 x 600mm mineral fibre panels are available in two thicknesses coated on one, or both sides, to provide fire protection from one hour up to 4 hours.

The Coated Panels are cut to fit the opening and friction fitted into position. The fire rated coating is used as an adhesive to fix panel sections into position, coat panel joints and paint service penetrations (100mm from both faces) to complete the harrier. The fire rated coating is flexible and able to accommodate movement of services and assures a smoke-tight seal.

If installed into a horizontal opening the Coated Panel system will not accommodate foot traffic. PFC Corofil Fire Stop Compound must be used. for this application.

Fire Ratings

Coated Panel Thickness

Fire Resistance



2 @ 50mm*
2 @ 75mm*

1 Hour
2 Hours
4 Hours

4 Hours
4 Hours
4 Hours

*Where two panels are used to form a barrier then panels coated on the outside surface only are necessary.


Install PFC Corofil Fire Stop Compound to provide 1 , 2, 3 or 4 hour penetration seals to all service penetration openings. Installation to be fully in accordance with manufacturers instructions - PFC Corofil, Chessington, Surrey, UK.